Applied Control - Emerson Impact Partner

Loading Events

Upcoming Events

Events Search and Views Navigation

Event Views Navigation

April 2020

ROC800L Configuration

April 15, 2020 - April 17, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$2,294
ROC800 Series

Configure API compliant liquid meter runs. This 2-½ day course will provide an overall working knowledge of the ROC800L. Participants are presented with a comprehensive view of the ROC800L hardware and software to obtain the necessary knowledge and practice needed to install and configure a ROC800L. Participants will know the differences between the ROC809 and ROC800L. Each student will be provided with a PC (ROCLINK preinstalled), a Remote Automation Solutions RTU (ROC800L), a communications cable, and a workbook for the…

Find out more »

Valve Trim & Body Maintenance

April 28, 2020 - April 30, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$3,000

This 3-day course explains how valves and actuators function and how they are installed and calibrated. It emphasizes installation, troubleshooting, parts replacement, and calibration of control valves, actuators, and digital valve controllers. Those who complete this course will be able to: ▪ Correctly perform installation procedures ▪ Perform basic troubleshooting ▪ Properly apply and calibrate FIELDVUE digital valve controllers ▪ Change valve trim, gaskets and packing Audience: This introductory course is for valve mechanics, maintenance personnel, instrument technicians, and others…

Find out more »

May 2020

Valve Maintenance with FIELDVUE Digital Valve Controller. Calibration using the Handheld communicator

May 12, 2020 - May 15, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$3,300

Specific for: Reliability Engineer Instrument Technician Valve Engineer Overview This is a 4 days session. The first 2-days of the course will cover sliding stem and rotary valves and actuators. Topics will include valve and actuator setup, maintenance, repair and troubleshooting. The following 2 days will be focused on the installation, calibration of the 6000 series digital valve controller (Digital Valve Controllers) using the 375/475 Field communicator. An overview of AMS ValveLink™® Software will be included. Students spend 50% of…

Find out more »

DeltaV Hardware and Troubleshooting

May 18, 2020 - May 21, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$3,553
Process Automation

Specific for: E&I Engineer Reliability Engineer Reliability Manager Control System Engineer Course No.: 7018 CEUs: 2.8 Venue: In-Class Overview This course is recommended for instrumentation and maintenance technicians, managers, and configuration engineers who need to know about DeltaV hardware. It provides an overview of the DeltaV Control Network, M- and S-series hardware, and software applications. Upon completion, you will be familiar with the hardware and be able to perform troubleshooting techniques. This 4-day course focuses on the hardware components that…

Find out more »

June 2020

AMS 2140 – Machinery Health Fundamentals

June 2, 2020 - June 3, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$1,995
CSI 2140

Course #2076 CEUs: 1.4 Venue: In-Class Overview This 2-day hands-on course focuses on the basic operation of the AMS 2140 Machinery Health Analyzer. Students collect data on lab machines. Note: You may take with Fundamentals of Vibration as a 4-day course. Audience This course is designed for personnel with little or no experience with AMS analyzers, but who are experienced in the field of vibration data collection and analysis. Prerequisites Understanding of vibration analysis. Familiar with basic vibration collection principles.…

Find out more »

July 2020

DeltaV Implementation I

July 27, 2020 - July 31, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
$4,482

Take control of your process control system. During the 4-½ day course, the student will be able to define system capabilities, define nodes, configure continuous and sequential control strategies, create process alarms, operate the system, troubleshoot the system, and modify operator displays. This course includes access to a virtual DeltaV system to practice and review course workshops complete with brief recorded demonstrations available after course completion. Audience: This course is designed for process and process control engineers responsible for obtaining…

Find out more »

August 2020

DeltaV Implementation II

August 10, 2020 - August 14, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$4,482

Specific for: Process Engineer Course No.: 7017 CEUs: 3.2 Venue: In-Class Overview This course is for process control engineers responsible for designing, implementing and testing configuration using the DeltaV system. During the 4-1/2 day course, the student will be able to identify function block structures, interpret function block status values, design error masking, define nodes, configure modules using State-Driven & Command-Driven algorithms, configure modules with Analog Control Palette Blocks and create simulation for testing purposes. Prerequisites Course 7009, DeltaV Implentation…

Find out more »

DeltaV – Using DeltaV Live Operator Interface – Graphics – Advanced

August 31, 2020 - September 4, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$4,482

Specific for: This 4-1/2 day course is for process control engineers responsible for configuring graphics in the DeltaV Live operator interface. This course teaches basic options through advanced configuration topics. This course is designed for process & process control engineers responsible for obtaining key production data, maintaining, configuring and troubleshooting a DeltaV system with the DeltaV Live Operator Interface. Prerequisites 7009, 7409, or 7025 Topics Graphics Studio Environment Customization DeltaV Live Operator Interface DeltaV Live Administration Display Interactions Functions Class…

Find out more »

September 2020

Control Valve Engineering I

September 15, 2020 - September 17, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$3,000

Learn how to select the right control valve, actuator and instrumentation accessories to optimize process flow. This 3-day course reviews design and operating principles of control valves, actuators, positioners and related accessories. It describes the sizing and selection methods for a broad variety of control valve assemblies. Students will solve several demonstration sizing and selection problems using Fisher Specification Manager and published materials, plus participate in equipment demonstrations and hands-on workshops. Students who complete this course will select the proper…

Find out more »

AMS Device Manager

September 22, 2020 - September 24, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
$2,662

This 3-day instructor-assisted course features a hands-on, self-paced environment. Training modules and exercises allow participants to grasp key concepts like how to configure, use and administer AMS Device Manager. Audience: The training exercises focus on skills required by engineers and technicians, and are based on real-world tasks that most users will encounter on the job. Topics 7020-1 Configuring and Using AMS Device Manager ▪ Viewing and Modifying Devices ▪ Creating a Plant Database Hierarchy and Adding Devices ▪ Using the…

Find out more »

October 2020

Plantweb Optics – Introduction

October 20, 2020 - October 21, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$2,100

This 2-day course is designed for new users of the Plantweb Optics software, and is based on the current software release. Students will learn how to navigate through the software, manage their databases by adding and mapping locations and assets using the Plantweb Optics Asset Explorer utility. Students will also learn how to navigate the Plantweb Optics Asset Viewer utility used on PC/laptop and mobile device applications to receive real-time information about equipment that is relevant to their job. Registration:…

Find out more »

November 2020

Electronic Gas Measurement Standard and the Emerson Flow Computer

November 3, 2020 - November 5, 2020
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$2,100

This 2.5-day course will provide a hands-on overview of API 21.1 standard for Electronic Gas Measurement and the Emerson FB1000/2000 Series Flow Computers. Participants are presented with the API standard while engaging in direct hands-on correlation to the flow computer’s features for measurement, auditing and archiving, and more. Gain the necessary  knowledge to effectively installation, configuration and maintenance. Each student will be provided with a PC with preinstalled software and all  necessary hardware and courseware for the duration of the…

Find out more »
+ Export Events
13705 Compark Blvd, Englewood, CO 80112
Phone: 303-799-9300 Fax: 303-799-1912

©2018 Applied Control. All rights reserved. Site Map | Terms & Conditions | Privacy | Terms of Use | Login

Emerson