Applied Control - Emerson Impact Partner

Loading Events

Past Events

Events Search and Views Navigation

Event Views Navigation

March 2016

Control Valve Technician I (Continuing Education Series)

March 17, 2016 @ 8:00 am - 5:00 pm

Learn how valves and actuators work and how to correctly maintain valves for their complete lifecycle. This 4-day course explains how valves and actuators function and how they are installed and calibrated. It emphasizes installation, troubleshooting, parts replacement, and calibration of control valves, actuators, positioners and digital valve controllers. Those who complete this course will be able to correctly perform installation procedures; preform basic troubleshooting; change valve trim, gaskets, and packing; and properly apply and calibrate positioners and FIELDVUETM digital…

Find out more »

April 2016

exida Training: IEC 61511: Functional Safety Analysis, Design & Operation

April 18, 2016 - April 22, 2016
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$2,995

Advance your safety outlook. This course provides an overview of process industry safety engineering from the point of view of the Risk Analyst, Process Safety Coordinator, and Control Systems Design Engineer. It delivers a complete overview of the functional safety lifecycle. The course reviews Process Hazard Analysis (PHA), Consequence Analysis, Layer of Protection Analysis (LOPA), Safety Integrity Level (SIL) Target Selection, Safety Requirements Specification (SRS) generation, failure rates, device and system reliability, SIF verification, SIF detailed design and Operations requirements.…

Find out more »

May 2016

ROC800 Series Configuration & Operations (Virtual Training)

May 31, 2016 - June 4, 2016
VIRTUAL
Login to MyConnect for Pricing
ROC800L Configuration

Configure AGA compliant gas meter runs. This three and a half day course will provide and overall working knowledge of the ROC800 series RTU. Participants are presented with a comprehensive view of the ROC800 series hardware and ROCLINK800 software to obtain necessary knowledge needed to effectively install, configure & operate the ROC800 series products. Each participate will be provided with a headset, computer link and a workbook for the course. Participants must provide their own laptop to participate in the…

Find out more »

July 2016

Severe Service Seminar

July 19, 2016
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
Free
Severe Service Power Seminar

Severe plant conditions can strain existing control equipment, creating an undesirable opportunity for bigger consequences. Operational excellence starts with selecting the right equipment for your process and requires proper maintenance over time. Since severe service applications demand equipment to consistently perform under more extreme process conditions, additional factors need to be considered when sizing, selecting and maintaining severe service control valves and regulators. Applied Control & Emerson Process Management are proud to present a one-day hands-on Severe Service Seminar in…

Find out more »

October 2016

Emerson Exchange 2016

October 24, 2016 - October 28, 2016
Austin Convention Center, 500 E Ceasar Chavez Street
Austin, 78701 United States
+ Google Map

  The Global Process Automation Conference that is By Users, For Users: The Emerson Exchange 2016 Conference is more than an industry-leading technical conference…it is a community of manufacturing leaders committed to extracting the most from their automation investment…and sharing their learning with each other. Best of Emerson Exchange 2015 in Denver: To register for this event you will need to visit the Emerson Exchange website. Registration is expected to open in Summer of 2016.   Now is the time……

Find out more »

January 2017

Managing Midstream Challenges: Keys to Leveraging Smarter Operations – Free Seminar & Discussion

January 25, 2017 @ 8:00 am - 4:30 pm
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
Free

    The Challenges are Changing: Midstream Oil and Gas operators are being pressured to work more even more efficiently with even fewer resources. With staff and budgets spread thin while equipment operates at or above maximum thresholds, operators are facing new challenges with overworked facilities. This strain comes coupled with economic uncertainty and evolving environmental regulations, forcing Midstream operators to constantly re-examine their processes. The Need for Leveraged Solutions is Real: When each facility is critical to business infrastructure,…

Find out more »

June 2017

Tank University(TM) Seminar – Billings

June 21, 2017 @ 8:30 am - 4:30 pm
Billings Petroleum Club, 27 North 27th Street, Suite 2200
Billings, MT 59101 United States
+ Google Map
FREE

Overview, expert advice, tools and troubleshooting tips for storage tank pressure management. The purpose of this course is to provide an introduction to storage tank safety solutions, including Tank Gauging, Tank Blanketing, Pressure Relief and Emergency Valves, and Flame Arrestors. In this one-day course, you will also learn about application-specific product sizing and selection for low-pressure storage tanks. Seminar Overview: Types of Storage Tanks Tank Venting Standard (API 2000) Relief & Emergency Vent Valves Regulators & Tank Blanketing Tank Level…

Find out more »

August 2017

Tank University(TM) Seminar- Loveland, CO

August 2, 2017 @ 8:30 am - 4:30 pm
Loveland, CO United States
EVENT FULL

This seminar will cover an overview, expert advice, tools, and troubleshooting tips for storage tank pressure management for oil & gas producers. The purpose of this seminar is to provide an introduction to storage tank safety solutions, including Tank Gauging, Tank Blanketing, Pressure Relief and Emergency Valves, and Flame Arrestors. In this one-day course, you will also learn about application-specific product sizing and selection for low-pressure storage tanks. Seminar Overview: Types of Storage Tanks Tank Venting Standard (API 2000) Relief…

Find out more »

2017 Applied Control Open House

August 29, 2017 @ 1:30 pm - 6:30 pm
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
Free

The Applied Control & Emerson Automation Solutions Open House will be on August 29, 2017. Consistently achieving operational excellence requires teamwork. Working together, we can improve reliability, safety, and efficiency in the world of process automation. Join us Tuesday, August 29, 2017 to celebrate a year of collaboration. Our fun-filled afternoon will include: Face-to-face time with Emerson's leading Subject Matter Experts Free training sessions Building tours Hands-on application interactions Happy hour and entertainment Raffle to benefit Children's Hospital Colorado Foundation Open…

Find out more »

June 2018

Tank University Seminar – Rifle, CO

June 13, 2018 @ 8:30 am - 4:30 pm
Rifle, CO Rifle, CO United States + Google Map

This seminar will cover an overview, expert advice, tools, and troubleshooting tips for storage tank pressure management for oil & gas producers. The purpose of this seminar is to provide an introduction to storage tank safety solutions, including Tank Gauging, Tank Blanketing, Pressure Relief and Emergency Valves, and Flame Arrestors. In this one-day course, you will also learn about application-specific product sizing and selection for low-pressure storage tanks. Seminar Overview: Types of Storage Tanks Tank Venting Standard (API 2000) Relief…

Find out more »

July 2018

Colorado Craft Brewer’s Process Summit

July 24, 2018 @ 9:30 am - 6:00 pm
Boulder, CO Boulder, CO United States + Google Map

The perfect pint is more than just quality ingredients. It also includes an innovative team and a dependable brewing process. In today’s increasingly competitive beer market, brewers nationwide are recognizing the need to minimize production losses and maximize brewing uptime to stay ahead of the game. Process innovations and automation tools can help you tap into your brewing process’ full potential so you can focus on creating perfect brews. Join us in a collaborative and educational discussion around process automation…

Find out more »

May 2019

Electronic Gas Measurement Standard and the Emerson Flow Computer

May 7 - May 9
Applied Control – Englewood Office, 13705 S Compark Boulevard
Englewood, 80112 United States
+ Google Map
$1950

This 2.5-day course will provide a hands-on overview of API 21.1 standard for Electronic Gas Measurement and the Emerson FB1000/2000 Series Flow Computers. Participants are presented with the API standard while engaging in direct hands-on correlation to the flow computer’s features for measurement, auditing and archiving, and more. Gain the necessary  knowledge to effectively installation, configuration and maintenance. Each student will be provided with a PC with preinstalled software and all  necessary hardware and courseware for the duration of the…

Find out more »
+ Export Events
13705 Compark Blvd, Englewood, CO 80112
Phone: 303-799-9300 Fax: 303-799-1912

©2018 Applied Control. All rights reserved. Site Map | Terms & Conditions | Privacy | Disclaimer | Login

Emerson