Applied Control - Emerson Impact Partner

FOUNDATION™ Fieldbus Communication Digital Valve Controller

Fieldbus Digital Valve Controller

FIELDVUE™ DVC6200f fieldbus digital valve controllers are approved for non-incendive, intrinsic safety, flameproof and explosion proof applications. Digital valve controllers work on both single- and double-acting actuators. FIELDVUE digital valve controllers provide online valve diagnostics and are a core part of the Emerson PlantWeb™ digital plant architecture.

FIELDVUE™ DVC6200f digital valve controllers are communicating, microprocessor-based current-to-pneumatic instruments with linkage-less, non-contact travel feedback. Three important functions are performed by the DVC6200f instrument:

  • Controlling the movement of a valve stem or shaft by converting the digital input signal from the process controller to a pneumatic output signal to the actuator.
  • Automatic calibration and configuration using the power of microprocessor technology.
  • Communication capability via the FOUNDATION™ fieldbus protocol to provide instrument and valve diagnostic information.

Registered by the Fieldbus Foundation, the DVC6200f uses the patented linkage-less, non-contact travel feedback technology. It offers an all digital Foundation fliedbus open communication protocol.

When installed in an Emerson Process Management PlantWeb™ system, the instrument will continually run valve diagnostics on-board. If and when problems are detected, the information can be directed to the appropriate personnel, automatically.

Documentation for the Fisher FIELDVUE DVC6200f Digital Valve Controller:

Fisher FIELDVIUE™ DVC6200F Digital Valve Controller for FOUNDATION™ fieldbus Instruction Manual Product Bulletin
Education | Request More Information


Comments are closed.

13705 Compark Blvd, Englewood, CO 80112
Phone: 303-799-9300 Fax: 303-799-1912

©2018 Applied Control. All rights reserved. Site Map | Terms & Conditions | Privacy | Disclaimer | Login