Applied Control - Emerson Impact Partner

Wireless Valve Controllers (On/Off)

About Emerson Smart Wireless Valve Controllers

Smart Wireless extends PlantWeb’s predictive intelligence into areas that were previously out of physical or economic reach, opening the door for new possibilities in process management. Remote locations, physical obstructions, and the high cost of engineering and integrating new technologies are no longer the barriers they were. The two assets below, the 4320 and the 4310 are two integral pieces to a complete package of wireless solutions.

4320 Fisher Wireless4310 TopWorx Wireless

4320 Fisher Wireless On/Off Control

The Fisher 4320 wireless position monitor is a non-contacting wireless position transmitter and limit switch that provides continuous position feedback. This rugged measurement device provides a precise wireless feedback signal to indicate equipment position in a percent (%) of span plus on/off indication. The 4320 can be used to monitor equipment such as valves, sliding-stem regulators, displacement and float level sensors, and relief valves.

The 4320 wireless position monitor is a component of Emerson’s Smart Wireless solutions for field instrumentation. Smart Wireless extends the PlantWeb predictive intelligence into areas that were previously out of physical or economic reach, opening the door possibilities in process improvement.

Easy to Use Resource:

  • Continuous monitoring of linear and rotary valves
  • Battery powered: no conduit easements or permits are needed
  • No-Contact linkage-less and multi-language local user interface for easy calibration & monitoring
  • Easily mounted on various valves from modulating control to automated quarter-turn or manual
  • Scalable – grows with your project to your needs.

Rugged, Reliable & Secure Design:

  • Self-organizing network that is not hindered by obstacles and disruptions
  • Network delivers greater than 99% data reliability
  • Anti-Jamming Technology
  • 128-bit AES encryption, key rotation, authentication and verification

4310 TopWorx Wireless Position Monitor

The TopWorx 4310 Wireless Position Monitor is a component of Emerson’s Smart Wireless solutions for field instrumentation.The device sends a wireless feedback signal through the Gateway to indicate valve position, device temperature, and power module status. This non-obtrusive position monitor won’t disrupt your existing process and is easy to overlay. The 4310 can be sued to monitor equipment such as valves, regulators, displacement and float level sensors, and relief valves.

Easy to Use Resource:

  • Designed for Wireless monitoring of open/closed position in linear and rotary valves
  • Battery powered: no conduit easements or permits are needed
  • No-Contact linkage-less and multi-language local user interface for easy calibration & monitoring
  • Easily mounted on various valves from modulating control to automated quarter-turn or manual
  • Scalable – grows with your project to your needs.

Rugged, Reliable & Secure Design:

  • Scalable Functionality in a small package.
  • Engineered Resin enclosure withstands corrosive environmental elements.
  • Designed to meet extrinsically safe and non-incendive requirements means it is more practical in hard to reach locations. 
  • Anti-Jamming Technology
  • 128-bit AES encryption, key rotation, authentication and verification

 

Education  |  Request More Information

 

Comments are closed.

13705 Compark Blvd, Englewood, CO 80112
Phone: 303-799-9300 Fax: 303-799-1912

©2018 Applied Control. All rights reserved. Site Map | Terms & Conditions | Privacy | Disclaimer | Login

Emerson